Third-Party Testing

We work with independent, accredited labs to test and verify our non-toxic cookware.

A kitchen countertop with a stove, a blue Dutch oven, a white pan with a gold handle, a blue toaster oven, and shelves holding jars and dishes against a green tiled wall.

Building a bigger table starts with what we put on it.

Made Without Forever Chemicals

Our cookware and food-contact surfaces are made without PFAS, including PTFE.

Over 250 Patents Globally

Our product design and engineering teams didn’t stop at just one innovation.

We Test for 700+ Analytes

Our products undergo extensive testing to rule out the presence of PFAS.

Up Close

Five stainless steel pots and pans with lids are arranged on a wooden countertop against a beige wall.

Titanium Pro NoCo® Technology

Our fully clad, tri-ply cookware pairs a stainless steel exterior with a titanium interior. NoCo® technology is pressed directly into the cooking surface for a coating-free nonstick effect made without PFAS.

A collection of ceramic pots and pans in pink and beige colors with gold handles is displayed on a white kitchen counter.

Thermakind® Ceramic Nonstick

Our proprietary ceramic nonstick coating delivers high-performance release and easy cleanup. It’s made without PFAS, including PTFE and PFOA, as well as lead, cadmium, or microplastics.

A blue countertop toaster oven with three control knobs sits on a wooden kitchen counter, surrounded by neutral cabinetry and a few plants in the background.

Wonder Oven®

Our bestselling air fryer toaster oven features stainless steel and glass interiors. Its bake pan, air fryer basket, and wire rack have food-contact surfaces made without PFAS.

Third-Party Testing FAQs

Our Place cookware is designed for safe everyday cooking and made with food-contact surfaces made without PFAS, including PTFE and PFOA. Third-party lab testing shows PFAS are not detected in our ceramic nonstick coatings and titanium cooking surfaces within the test methods’ reporting limits.

Yes, Our Place cookware and cooking surfaces are made without PFAS, including PFOA and PTFE, but you don’t have to take our word for it. We work with Light Labs, an ISO/IEC 17025-accredited independent testing lab, to help verify our safety claims, so you can trust what's in your kitchen and review the data yourself.

Our recent third-party test results show that PFAS were not detected in our Titanium Pro NoCo® Technology, our Thermakind® ceramic nonstick coating, and the food-contact cooking surfaces of our Wonder Oven (bake pan, air fryer basket, and wire rack), within the test methods reporting limits.

Yes, our Titanium Pro cookware is designed for safe, everyday cooking when used as directed. The interior cooking surface is titanium with NoCo® technology that is directly pressed into the pan rather than applied as a traditional nonstick coating. The cookware is made without PFAS, including PFOA and PTFE, and our recent third-party testing by Light Labs validates that PFAS were not detected within the test method’s reporting limits.

Third-party labs tested Our Place Titanium Pro NoCo® Technology, our Thermakind® ceramic nonstick coating, and the food contact cooking surfaces of our Wonder Oven (bake pan, air fryer basket, and wire rack) for a panel of over 680 compounds. The April 2026 testing covered the following PFAS analytes including PFBA, PFBS, PFDA, PFDoA, PFDoS, PFDS, PFHpA, PFHpS, PFHxA, PFHxS, PFNA, PFNS, PFOA, PFOS, PFPeA, PFPeS, PFTeDA, PFTrDA, PFTrDS, PFUnA, PFUnDS, and much more. The results showed these substances were not detected within the test methods’ reporting limits.

Yes. Our third-party testers work with ISO/IEC 17025 accredited and independent testing laboratories. ISO/IEC 17025 is the international standard used to assess the competence, impartiality and consistent operation of testing and calibration laboratories.

For Our Place, that means the lab’s testing is performed under recognized quality standards using validated methods, qualified personnel and calibrated equipment. These reports help support our product safety claims by showing what was tested, how it was tested and whether the tested substances were detected within the applicable reporting limits.

Independent, accredited laboratories receive representative samples of Our Place products or materials and test them using recognized methods selected for the product type, material and substance being evaluated. The labs then issue written reports that summarize the testing methods, reporting limits and results.

Our quality and product teams review those reports and use the findings to help support our safety claims, confirm material specifications and inform future product development.